/
6.1.1 Ports
Ready for review
6.1.1 Ports
- Jacopo Tani
Owned by Jacopo Tani
Last updated: Jul 19, 2022
This page defines which FC ports are used, how, and for what.
Settings on this page should be kept in default mode, as shows in the image below.
Enable UART1, with settings as shown, to have the Raspberry Pi talk to the flight controller.
, multiple selections available,
Related content
6.1.2 Configuration
6.1.2 Configuration
More like this
6.1 Setting up the Flight Controller
6.1 Setting up the Flight Controller
More like this
4. First connection
4. First connection
Read with this
6. Setting up the flight controller
6. Setting up the flight controller
Read with this
6.3 Pre-flight checklist
6.3 Pre-flight checklist
More like this
1. Assembling the Duckiedrone (DD21): the hardware
1. Assembling the Duckiedrone (DD21): the hardware
Read with this