The flight controller implements a number of critical low-level behaviors.

Installing Cleanflight Configurator (CFC)

• Install Google Chrome

• Install the Cleanflight Configurator for Chrome

Connecting to the Flight Controller (FC)

1. Unplug the battery from your drone

   1. double-check the battery is unplugged

2. Disconnect the Raspberry Pi from the FC

3. Connect the mini USB cable to your FC and to your base station

4. Start CFC on your base station

Image Added

Bringing the FC software up to date

1. Identify the version of your flight controller:

2. Download the following new firmware for your version:

• SP Racing F3 Acro:

• SP Racing F3 OSD:

3.

Installing Betaflight Configurator (BFC)

• Follow the instructions on the developer’s website to download the latest Betaflight configurator: https://github.com/betaflight/betaflight-configurator/releases (scroll down for download links):
  

  • macOS: https://github.com/betaflight/betaflight-configurator/releases/download/10.8.0/betaflight-configurator_10.8.0_macOS.dmg

  • Windows: https://github.com/betaflight/betaflight-configurator/releases/download/10.8.0/betaflight-configurator_10.8.0_win64-installer.exe

  • Ubuntu: https://github.com/betaflight/betaflight-configurator/releases/download/10.8.0/betaflight-configurator_10.8.0_amd64.deb

Connecting to the FC

1. Unplug the battery

2. Disconnect the Raspberry Pi from the FC

3. Connect the mini USB cable to your FC and to your base station

4. Run the BFC on your base station

   1. Verify the version on the top left of the black and yellow window popping up. It should 10.8.0 (Sec9465)
      

1. 1. Image Added

2. Verify the recognized devices in the top right corner. You should see (depending on your OS)
   

1. Image Added

   
   

2. Navigate to “Options” on the left column and activate “Permanently Enable Expert Mode”

3. Go back to the “Welcome” page

4. Press on “Connect” (top-right corner)

A successful connection will lead to a page looking like this:

Image Modified

Familiarizing with the configurator and FC settings interface

We will explore each setting relevant to the Duckiedrone in detail later. A few high-level observations:

• Find your FC firmware version (top-left or bottom-right)
  

• Image AddedImage Modified

• Keep an eye on the FC “CPU Load”. This tells us how much effort the onboard microcontroller on the FC is busy. We should never let it go above 40% with chosen settings, with lower being better.

Bringing the FC software up to date

1. Verify the